Link’s robust Air Link Gen 3 Tandem Drive Suspension accommodates 315 tires with snow chains, is easier to maintain, has a three-year warranty and weighs 50 pounds less than its Gen 2 predecessor

SIOUX CENTER, Iowa, USA (October 22, 2019) – Link Mfg., Ltd. announced the introduction of its new 52K Air Link Gen 3 Tandem Drive Suspension today. The suspension has been specifically reconfigured to meet the needs of states, municipalities and road maintenance contractors using tire chains on heavy vocational equipment with 315 tires. The new suspension features maintenance advantages, is 50 pounds lighter and carries an extended three-year warranty.

Many entities with responsibilities for large-scale snow and ice management operate heavy equipment, with dump trucks and refuse vehicles often being pressed into service during winter months. Unfortunately, for those fleets running 315 tires, using tire chains can cause damage to a vehicle’s suspension and undercarriage due to inadequate clearance.

“Link’s new 52K Gen 3 has been reengineered specifically to improve clearance for 315 tires and chains while maintaining the exceptional ride quality long associated with our Air Link heavy vocational suspension line,” said Chris English, Chris English, Managing Director of heavy vocational products for Link. “Hanger brackets have been lengthened, heavy-duty dampers have been moved forward, center bushings have been raised, and the vertical distance between the trailing arm and walking beam pivots has been optimized.”

The 52K Air Link Gen 3 Tandem Drive Suspension also features larger, high-volume, low-frequency air springs that deliver a smoother ride whether the vehicle is under load or empty. Dual height-control valves maintain proper ride height, leveling the vehicle independent of load and maximizing its roll stability. Weighing in at only about 875 pounds, the 52K Gen 3 is now 50 pounds lighter than its predecessors and lighter than competing suspension offerings.

The Gen 3 has also been engineered to enable easier service and to demand less maintenance. The suspension’s anti-corrosive bushings require no lubrication, and trailing arm bushings can be easily replaced with hanging brackets in situ. The suspension has been designed with a lower number of moving parts, extra-large bearing surfaces, more brawny main components and a higher level of load-bearing redundancy. Once wheel alignment is set on the Air Link, no future adjustments are required.

The 52K Air Link Gen 3 Tandem Drive Suspension offers numerous advantages compared to spring leaf or rubber block walking beam, two-spring “six-rod” and trailing arm suspensions, not the least of which is ride quality. The Air Link Gen 3 delivers a smooth comfortable ride, resulting in less driver fatigue and equipment damage. High roll stability, coupled with equal weight distribution to both axles means safer operation on-highway, off-highway and in all weather conditions.

The new suspension’s superior ride, handling and tractive characteristics can make all the difference when a vehicle is transitioning from paved roads to off-highway conditions, such as worksites or municipal dumps. These attributes also play a significant role in vehicle control during snow and ice management duty. Because, like all Air Link suspensions, the 52K Air Link Gen 3 Tandem Drive Suspension is 100 percent off-highway rated it is not only well suited for the rigors of winter road cleanup; it was designed for, and can be employed to tackle, much worse.

“The Air Link suspension was originally developed to operate in extreme environments, such as Canada’s oil fields and remote northern logging areas and has also been proven in harsh military applications in the U.S., Canada and the Middle East,” said Chris English. “The 52K Gen 3 is the latest iteration of the air-over-walking-beam suspension design Link patented more than 26 years ago and is a sound and mature technology.”

The Air Link has three times more roll stability than any other vocational air-ride suspension, and it rides four times smoother than a conventional spring pack and 10 times smoother than a rubber block suspension. The Air Link retains the benefits of a walking beam suspension without any of the problems associated with steel or rubber walking beam suspensions.

All Air Link suspensions are treated with Link’s exclusive Link-KOAT® self-healing metal treatment. Link-KOAT® provides unparalleled corrosion resistance and rust protection, even when surfaces are exposed to excessive abrasion, harsh chemicals and other severe-duty environmental factors. The new 52K includes an extended three-year warranty.

“Until now, fleets managing snow and ice with heavy vocational vehicles were forced to choose between the benefits of air springs and the ability to use 315 tires,” said Chris English. “Link’s new 52K Gen 3 Tandem Drive Suspension makes their choice a lot easier moving forward.”

About Link Mfg., Ltd.

Link develops and manufactures a variety of suspension systems specially engineered to address the unique needs of commercial vehicles and equipment. Link is driven to outperform as the worldwide leader in heavy-duty truck cab air suspensions marketed under the brand name Cabmate. U.S.-based Link Manufacturing is an ISO 14001: 2015 (EMS) certified company whose primary products include cab, chassis and auxiliary suspensions. Canadian-based Link Suspensions of Canada is an ISO 9001 certified company whose primary products include heavy vocational and off-highway chassis suspensions. Link also makes specialty products such as tire pressure equalization systems, ramps and other products designed to enhance the productivity of commercial vehicles.

Link, Cabmate and Air Link are registered trademarks of Link Mfg., Ltd.